Amazon announced its 2027 US fee changes on November 5, 2026. Most changes start January 15, 2027; storage and low-inventory changes have a separate February start. Amazon’s headline is an average $0.19 increase per FBA unit sold, with increases or decreases depending on the product, size, and price. The fuel and logistics surcharge is unchanged. Amazon’s announcement
For a US FBA seller, the useful next step is a product-level planning check. This article covers the announcement and an original worksheet approach. It is not a complete rate card or a claim that every SKU becomes nineteen cents more expensive.
Keep two effective dates in the plan
Amazon identifies February 1, 2027 for eliminating the storage utilization surcharge and combining aged-inventory charges with monthly storage in an age-based rate. It describes flat or lower charges for inventory turning within six months and higher charges for aged inventory. Removing a separate line item therefore does not mean aged stock becomes free to hold.
Also from February 1, Amazon says the low-inventory fee will use a below-28-days-of-supply test based on actual shipments in both the four weeks before and after assessment. Amazon’s seller announcement
Zeroth analysis: maintain separate fulfillment, storage, and replenishment assumptions. A single “2027 fee increase” cell cannot explain which cost changed or when it should enter your forecast. Keep the future assumptions alongside the current ones until their applicable dates; changing today’s purchasing or pricing controls prematurely creates a different problem.
Build the comparison around the same product and period
Amazon points sellers to its Fee Change Comparison dashboard in Amazon Profit Analytics and its Revenue Calculator. Amazon’s planning tools
Our suggested workflow: start with your highest-volume SKUs and products with the least contribution headroom. For each, save the source and retrieval date of the estimate, then record:
- The SKU, price, packaged dimensions, weight, and fee category used in the estimate.
- The current and proposed fee amounts, including which components each amount contains.
- The effective period and whether the estimate reflects a seasonal or non-seasonal scenario.
- Expected unit volume, cost of goods, other variable costs, and the contribution you need to retain.
- Any missing input, with an owner and a date to check it again.
Compare matching scenarios before interpreting the difference. A different price, package measurement, or seasonal assumption can make a comparison misleading even when both numbers were copied accurately. Keep a separate entry for an unresolved estimate instead of filling its blank cell with the overall average.
For a broader contribution calculation, use our minimum-price planning guide. A fulfillment-fee estimate alone is not a complete profit calculation.
Worked example: the average can hide the SKU that needs attention
Hypothetical example — these are invented planning inputs, not Amazon’s 2027 rates or a tested seller result. Suppose you model 1,000 units of SKU A and 1,000 units of SKU B in the same future period. Your assumed fulfillment-fee differences are:
| SKU | Assumed change per unit | Change for 1,000 units |
|---|---|---|
| A | +$0.50 | +$500 |
| B | −$0.10 | −$100 |
The combined increase is $400, or $0.20 per unit across 2,000 units. Applying that blended twenty-cent figure to both products would assign $200 to each. It would understate A’s increase by $300 and miss B’s $100 reduction entirely.
Now suppose the same worksheet starts with contribution of $0.60 per unit for A and $2.00 for B. If only the assumed fulfillment fee changes, the resulting contribution is $0.10 for A and $2.10 for B. Combined contribution falls from $2,600 to $2,200, but the operational priority is A: a small extra cost or discount could consume its remaining headroom.
That does not automatically justify a price increase. Review the input, feasible selling price, supplier cost, and reorder quantity before choosing an action. If you model a new price, calculate its associated costs again rather than assuming every extra dollar reaches contribution. Replace every invented input with verified product-level evidence before using this worksheet for a decision.
Review aging stock without creating the opposite inventory problem
Zeroth analysis: pair the cost worksheet with an age-and-demand review. Separate inventory that supports continuing demand from stock you are deliberately winding down. For each proposed replenishment, write down which demand period it covers and how much inventory could remain afterward.
Use a base case and a slower-sales case. If the purchase only looks attractive when every unit sells quickly, identify the cost and cash exposure of the slower case before committing. Conversely, reducing every purchase to minimize storage exposure can leave a reliable seller without enough stock. Our reorder-point guide explains how to separate demand during lead time from a safety buffer; it is not a calculation of Amazon’s low-inventory fee.
What to verify before acting
This review did not establish the detailed rate tables or product-specific exceptions. The linked help pages did not expose their full contents publicly when checked. We have therefore omitted exact SKU rates, category eligibility rules, and predictions of your savings or charges.
Save a dated account-level comparison, resolve missing rates through Amazon’s available documentation, and review the largest dollar changes alongside the lowest-contribution SKUs. Keep the source evidence with the decision so a later fee estimate can be compared against the assumption that actually drove it.
Sources & further reading
- Amazon: 2027 US referral and FBA fee announcement ↗Checked November 8, 2026
- Amazon Seller News: 2027 US fee updates ↗Checked November 8, 2026
Sources support reported facts; practical recommendations are Zeroth’s analysis. Amazon features and availability can change.


